Junior Rescue Diver
You’ll use your basic scuba equipment and will need a pocket mask to practice in-water resuscitation. During exercises, you’ll work with an oxygen unit, floats, marker buoys and perhaps CPR mannequins. Your Instructor will explain the equipment that you need and may suggest additional gear, such as your own first aid kit, which will be useful throughout your diving career.
What is scuba gear?
Scuba diving equipment allows you to visit the underwater world by making it possible to breathe, see and move comfortably while below the surface. Gear helps you change from being a land-dweller to somewhat of an aquatic being – if only for a little while. A mask lets you see clearly. A scuba regulator and tank provide the air you need. Fins allow you to swim efficiently, and a wetsuit helps you stay warm. Whether you’re just starting as a scuba diver or you’re an experienced diver looking for new equipment, you’ll find helpful suggestions and tips in this section. Keep in mind that fit, comfort, and suitability are the three most important considerations when choosing gear, but you don’t have to sacrifice color coordination and looking good.
Where will you use your scuba gear?
You can dive almost anywhere there’s water, and the scuba gear you use will vary slightly based on the dive environment. There are four general categories for dive equipment, but some gear fits in all categories – for example, the same mask is fine for all environments.
Tropical Scuba Equipment – In warm, clear water, you only need minimal exposure protection and can choose light-weight, streamlined scuba components. Use this scuba gear when diving in water that is 24ºC/75ºF or warmer.
Temperate Scuba Equipment – When you’re equipped for temperate climates you have maximum versatility because you can dive in the tropics and also in water that’s a bit cooler. Use this scuba gear in water that is 15-24ºC/60-75ºF.
Cold-water Scuba Equipment – Cool climates often have spectacular diving. With good exposure protection and the right equipment, you can scuba dive in cold water in comfort. Use this scuba gear in water that is cooler than 15ºC/60ºF.
What type of technical scuba equipment should you use?
Technical (tec) diving involves diving beyond normal recreational scuba diving limits. Participating in tec diving requires additional experience, training and (of course) equipment. In recreational diving you use one scuba tank, but tec divers typically wear twin cylinders or closed-circuit rebreathers (CCRs), plus one or more additional tanks, each with different gas blends. They usually have two or more completely independent regulators and dive computers, as well as other dive gear backups. Here is what a typical tec diver might use:
Primary mask and backup mask – Although any scuba mask is adequate, tec divers prefer compact masks for minimum resistance in the water. A backup mask is carried in a pocket in case of loss or damage to the primary mask.
Fins – Tec divers often use dry suits, requiring large style, open-heel adjustable fins.
Wing-type BCD and harness – A high capacity BCD with a backup gas bladder mounts between the harness and cylinder. The backup bladder is required because a tec diver may be too heavy to swim to the surface if the main BCD fails. The harness is a shoulder, waist, and crotch strap assembly that holds tanks to the tec diver’s back, with D-rings mounted on the shoulders and at the waist for clipping equipment.
Primary and secondary regulator – The primary regulator has a two-meter/seven-foot hose for sharing gas with a teammate in an emergency. The secondary regulator is independent for use in case of malfunction in the primary regulator. The secondary is also used when sharing gas with a teammate via the primary regulator.
Twin cylinders, decompression cylinders/stage bottles – High-capacity cylinders hold high-pressure compressed air, enriched air or trimix depending upon dive requirements. An independent decompression cylinder and regulator is clipped to a harness on the side. Extra tanks are used to extend dive time and/or to carry a gas for optimizing decompression. Often, two cylinders are carried.
Multi Gas dive computers and submersible pressure gauge (SPG) – Dive computers, one primary and one backup, track and display decompression requirements, and allow tec divers to switch to different kinds of gas blends to optimize decompression. If not integrated into the dive computers, SPGs constantly displays how much air remains in the cylinders.
Drysuit – Provides insulation for a comfortable dive over a long duration.
Other equipment – Compass, slate, delayed surface marker buoy (DSMB), emergency signaling devices, backup dive tables, Z-knife, shears, safety reel, and lift bag.
Register for Rescue Diver Online – PADI’s eLearning option – to start now. You progress through five knowledge development sections using a web-based system that lets you learn at your own pace through an easy-to-use, interactive program. You also have access to an online version of the Rescue Diver Manual for reference during and after the course.
If you prefer, you can choose to study with the Rescue Diver Manual and watch the Rescue Diver Video (a book and DVD package). Go to Qatar Scuba to enroll in the course, get your materials and start learning. Your Instructor will meet with you to schedule knowledge review sessions along with your rescue exercises and scenarios.